Quest Hi-E Dry Vehere
Quest HI-E Dry dehumidifiers are designed for plug-and-play or ducted installations.
If pools and spas are the intended application, the HI-E DRY Vehere (192 pints per day of water removal) can be used as a pool & spa area humidity sensing controller applied either as a free-standing device directly in the pool area or operated remotely to provide dehumidified air to the pool or spa area using optional ducting and remotely mounting the humidity controller.
All Quest Plug-And-Play Dehumidifiers can be used as free-standing units and require no installation.
Standard conditions are determined by the American Home Appliance Manufacturers (AHAM) and are used because capacity will vary with conditions. AHAM standard rating conditions are 80ºF and 60%RH. At these conditions, the capacity of the Quest Hi-E Dry Vehere is 192 pints per day.
Quest HI-E Dry Vehere Specifications
|Power:||12.0 Amps, 115V|
|Water Removal:||192 Pints/Day
|Operating Temp:||33°F to 110°F|
|W x H x D:||36.5″ x 40″ x 19″|
|4025283||Vehere Remote Humidity Sensor/Control|
|4021799||Filter (2 Filters Required)|
|4024750||12” x 25’ Flext Duct|
|4019663||Quiet-Vent Exhaust Ventilator|
- Lower Equipment Cost
- Lower Electrical Cost
- Higher Efficiency